NetNews Offline 2/NetNews Offline Volume 2.iso/news/comp/sys/amiga/hardware-part1/5494

Internet Message Format | 1996-08-05 | 1.4 KB

X-Mailer: Zodiac's Point 37.204 [REGISTERED 0165] via [DOS/NCBMail V2.22 REL.:200196]
Message-ID: <[e-mail]>
References: <[e-mail]>
X-Gateway: ZCONNECT UU hhks.gun.de [DUUCP vom 01.07.1994]
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit
From: [e-mail] (Boris Hinzer)
Subject: Re: CyberSCSI UnitControl V1.5
Date: 24 Feb 1996 20:06:40 +0100
Path: r-m-b.gun.de!crow
Newsgroups: comp.sys.amiga.hardware
Distribution: world

[e-mail] (rebensto) schrieb am 21.02.96

re> When I set 10MB/s in the special menu of the prg unitcontrol v1.5
re> which is shipped with the cyberSCSI controller, my baracuda fast-scsi drive
re> is about 7mb/s fast and works without errors. I click on the set-button
re> to save these settings it works until I boot again but afterwards it
re> always shows a different value there like 7mb/s etc and the drive is much
re> slower (about 4- 5mb/s). I use the cyberSCSI with a cyberstorm060.
re>
re> How can I set the value to be saved ?
re> Or how can I run the program from cli to set the 10Mb/s value automatically?
re> It doesn`t seem to be saved in rdb!
re>
re> This question is also adressed to the dudes at phase5 if they read news.
re> l8z Crayor!
re>
IMHO you'll have to change a jumper on your hd to make it possible...

cya

[e-mail]